JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series S 500

Housing Designation	Shaft Dia.		Dimensions
	d₁		A	A₁	H	H₁	H₂	J	L	G
	mm.	inch.	mm.							inch.
S 505	20	¾	65	52	76	40	16	130	165	½
S 506	25	1	76	54	90	50	19	150	190	½
S 507	30	1 ⅛	80	52	95	50	20	150	190	½
S 508	35	1 ¼	86	60	115	60	25	170	205	½
S 509	40	1 ½	88	60	115	60	25	170	215	½
S 510	45	1 ¾	88	60	115	60	25	170	215	½
S 511	50	2	100	72	130	70	28	210	255	⅝
S 512	55	2 ⅛	105	75	135	70	30	210	275	⅝
S 513	60	2 ¼	110	82	155	80	28	230	295	⅝
S 514	60	2 ⅜	112	82	157	80	28	235	287	⅝
S 515	65	2 ½	113	82	160	80	32	230	290	⅝
S 516	70	2 ¾	125	90	180	95	32	260	330	¾
S 517	75	3	125	90	185	95	34	260	320	¾
S 518	80	3 ⅛	140	105	200	100	35	290	363	¾
S 519	85	3 ¼	140	100	215	112	35	290	363	¾
S 520	90	3 ½	157	114	220	112	37	320	405	¾
S 522	100	4	165	120	245	125	43	350	425	¾
S 524	110	4 ¼	185	120	270	140	45	350	410	⅞
S 526	115	4 ½	190	130	290	150	50	380	445	⅞
S 528	125	5	205	150	305	150	50	420	500	1 ⅛
S 530	135	5 ¼	220	160	325	160	60	450	530	1 ⅛
S 532	140	5 ½	235	160	345	170	50	470	550	1 ⅛
S 534	150	6	238	172	380	180	54	520	630	1 ¼
S 536	160	6 ½	244	194	405	190	60	560	690	1 ¼
S 538	170	6 ¾	257	216	425	200	64	580	700	1 ¼
S 540	180	7	262	205	445	210	60	610	740	1 ¼
S 544	200	8	277	230	490	240	64	680	785	1 ½

Series S 600

Housing Designation	Shaft Dia.		Dimensions
	d₁		A	A₁	H	H₁	H₂	J	L	G
	mm.	inch.	mm.							inch.
S 605	20	¾	80	55	95	50	16	150	196	½
S 606	25	1	82	55	100	50	16	150	196	½
S 607	30	1 ⅛	90	62	115	60	20	170	215	½
S 608	35	1 ¼	95	64	120	60	21	170	220	½
S 609	40	1 ½	105	75	130	70	28	210	270	⅝
S 610	45	1 ¾	115	75	140	70	28	210	270	⅝
S 611	50	2	120	85	155	80	28	230	290	⅝
S 612	55	2 ⅛	125	85	160	80	28	230	295	⅝
S 613	60	2 ¼	130	94	185	95	28	260	335	¾
S 614	60	2 ⅜	130	94	190	95	32	265	330	¾
S 615	65	2 ½	140	104	197	100	35	290	360	¾
S 616	70	2 ¾	145	112	215	112	36	290	365	¾
S 617	75	3	155	112	218	112	36	320	405	¾
S 618	80	3 ⅛	160	120	250	125	35	350	420	¾
S 619	85	3 ¼	170	120	250	125	35	350	420	¾
S 620	90	3 ½	175	120	270	140	45	350	410	⅞
S 622	100	4	190	130	295	150	50	390	450	⅞
S 624	110	4 ¼	205	160	320	160	60	450	530	1 ⅛
S 626	115	4 ½	215	160	345	170	60	470	550	1 ⅛
S 628	125	5	235	172	380	180	53	520	630	1 ¼
S 630	135	5 ¼	245	194	405	190	60	565	690	1 ¼
S 632	140	5 ½	255	215	425	200	64	580	700	1 ¼
S 634	150	6	265	230	445	210	60	610	740	1 ¼
S 636	160	6 ½	275	230	490	225	64	650	785	1 ½
S 638	170	6 ¾	285	220	520	240	70	680	830	1 ½
S 640	180	7	300	230	520	250	70	720	870	1 ½

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series S 3000 and SN 3100

Shaft Dia. d₁ mm.	Dimensions mm.								Housing Designation	Bearing and Adapter Sleeve Designation	Locating ring (s) (to be ordered separately)		Felt strip (2 per housing) Designation	Housing (Alternate Designation) Designation
Shaft Dia. d₁ mm.	A	A₁	H₁	H₂	J	L	CA	G	Housing Designation	Bearing and Adapter Sleeve Designation	Designation	Qty.	Felt strip (2 per housing) Designation	Housing (Alternate Designation) Designation
110	150	110	112	40	320	390	56	24	S 3024 K	23024 CK + H 3024	FRB 10/180	1	FS 460	SN 3024
115	160	120	125	45	350	420	62	24	S 3026 K	23026 CK + H 3026	FRB 10/200	1	FS 460	SN 3026
125	170	120	140	45	350	420	63	24	S 3028 K	23028 CK + H 3028	FRB 10/210	1	FS 510	SN 3028
135	175	130	150	45	380	460	66	24	S 3030 K	23030 CK + H 3030	FRB 10/225	1	FS 510	SN 3030
140	190	130	150	50	390	470	70	24	S 3032 K	23032 CK + H 3032	FRB 10/240	1	FS 680	SN 3032
150	200	160	160	55	450	540	77	30	S 3034 K	23034 CK + H 3034	FRB 10/260	1	FS 680	SN 3034
160	210	160	170	55	470	560	84	30	S 3036 K	23036 CK + H 3036	FRB 10/280	1	FS 680	SN 3036
170	210	160	170	55	470	560	85	30	S 3038 K	23038 CK + H 3038	FRB 10/290	1	FS 680	SN 3038
180	235	170	180	60	515	615	92	30	S 3040 K	23040 CK + H 3040	FRB 10/310	1	FS 680	SN 3040
200	255	190	200	70	580	690	100	36	S 3044 K	23044 CK + H 3044	FRB 10/340	1	FS 950	SN 3044
220	265	200	210	75	610	720	102	36	S 3048 K	23048 CK + H 3048	FRB 10/360	1	FS 950	SN 3048
240	285	220	240	80	680	820	114	45	S 3052 K	23052 CK + H 3052	FRB 10/400	1	FS 1120	SN 3052
260	295	230	250	80	720	860	116	45	S 3056 K	23056 CK + H 3056	FRB 10/420	1	FS 1120	SN 3056

100	150	110	112	40	320	390	66	24	SN 3122	23122 CK + H 3122	FRB 10/180	1	FS 460	—
110	160	120	125	45	350	420	72	24	SN 3124	23124 CK + H 3124	FRB 10/200	1	FS 460	—
115	170	120	140	45	350	420	74	24	SN 3126	23126 CK + H 3126	FRB 10/210	1	FS 460	—
125	175	130	150	45	380	460	78	24	SN 3128	23128 CK + H 3128	FRB 10/225	1	FS 510	—
135	205	150	150	50	420	500	90	30	SN 3130	23130 CK + H 3130	FRB 10/250	1	FS 510	—
140	220	160	160	60	450	530	96	30	SN 3132	23132 CK + H 3132	FRB 10/270	1	FS 680	—

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SN 500

Shaft Dia.		Housing Dimensions											Housing Designation	Bearing & Adapter Sleeve	Locating Ring		Felt Strip
d₁		Millimeter												Bearing & Adapter Sleeve	Designation	No.	Designation	No.
inch.	mm.	G	B	H	H₁	C	M	A	N	N₁	CA	S		Designation	Designation	No.	Designation	No.
¾	20	67	46	75	40	19	130	165	20	15	25	12	SN 505	1205 K + H 205	FRB 5/52	2	FS 110	2
¾	20	67	46	75	40	19	130	165	20	15	25	12	SN 505	2205 K + H 305	FRB 7/52	1	FS 110	2
1	25	77	52	90	50	22	150	185	20	15	30	12	SN 506	1206 K + H 206	FRB 7/62	2	FS 190	2
1	25	77	52	90	50	22	150	185	20	15	30	12	SN 506	2206 K + H 306	FRB 10/62	1	FS 190	2
1 ⅛	30	82	52	95	50	22	150	185	20	15	33	12	SN 507	1207 K + H 207	FRB 8/72	2	FS 190	2
1 ⅛	30	82	52	95	50	22	150	185	20	15	33	12	SN 507	2207 K + H 307	FRB 10/72	1	FS 190	2
1 ¼	35	85	60	110	60	25	170	205	20	15	34	12	SN 508	1208 K + H 208	FRB 7.5/80	2	FS 190	2
														2208 K + H 308	FRB 10/80	1
														22208 K + H 308	FRB 10/80	1
1 ½	40	85	60	110	60	25	170	205	20	15	31	12	SN 509	1209 K + H 209	FRB 6/85	2	FS 190	2
														2209 K + H 309	FRB 8/85	1
														22209 K + H 309	FRB 8/85	1
1 ¾	45	90	60	115	60	25	170	205	20	15	33	12	SN 510	1210 K + H 210	FRB 6.5/90	2	FS 190	2
														2210 K + H 310	FRB 10/90	1
														22210 K + H 310	FRB 10/90	1
2	50	95	70	130	70	28	210	255	23	18	33	16	SN 511	1211 K + H 211	FRB 6/100	2	FS 260	2
														2211 K + H 311	FRB 8/100	1
														22211 K + H 311	FRB 8/100	1
2 ⅛	55	105	70	135	70	30	210	255	23	18	38	16	SN 512	1212 K + H 212	FRB 8/110	2	FS 260	2
														2212 K + H 312	FRB 10/110	1
														22212 K + H 312	FRB 10/110	1
2 ¼	60	110	80	150	80	30	230	275	23	18	43	16	SN 513	1213 K + H 213	FRB 10/120	2	FS 260	2
														2213 K + H 313	FRB 12/120	1
														22213 K + H 313	FRB 12/120	1
2 ½	65	115	80	155	80	30	230	280	23	18	41	16	SN 515	1215 K + H 215	FRB 8/130	2	FS 260	2
														2215 K + H 315	FRB 10/130	1
														22215 K + H 315	FRB 10/130	1
2 ¾	70	120	90	175	95	32	260	315	27	22	43	20	SN 516	1216 K + H 216	FRB 8.5/140	2	FS 330	2
														2216 K + H 316	FRB 10/140	1
														22216 K + H 316	FRB 10/140	1
3	75	125	90	185	95	32	260	320	27	22	46	20	SN 517	1217 K + H 217	FRB 9/150	2	FS 330	2
														2217 K + H 317	FRB 10/150	1
														22217 K + H 317	FRB 10/150	1

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SN 500

Shaft Dia.		Housing Dimensions											Housing Designation	Bearing & Adapter Sleeve	Locating Ring		Felt Strip
d₁		Millimeter												Bearing & Adapter Sleeve	Designation	No.	Designation	No.
inch.	mm.	G	B	H	H₁	C	M	A	N	N₁	CA	S		Designation	Designation	No.	Designation	No.
3 ⅛	80	145	100	195	100	35	290	345	27	22	62	20	SN 518	1218 K + H 218	FRB 16/160	2	FS 330	2
														2218 K + H 318	FRB 11/160	2
														22218 K + H 318	FRB 11/160	2
														23218 K + H 2318	FRB 10/160	1
3 ¼	85	145	100	210	112	35	290	345	27	22	53	20	SN 519	1219 K + H 219	FRB 10.5/170	2	FS 330	2
														2219 K + H 319	FRB 10/170	1
														22219 K + H 319	FRB 10/170	1
3 ½	90	160	110	215	112	40	320	380	32	26	70	24	SN 520	1220 K + H 220	FRB 18/180	2	FS 370	2
														2220 K + H 320	FRB 12/180	2
														22220 K + H 320	FRB 12/180	2
														23220 K + H 2320	FRB 10/180	1
4	100	175	120	240	125	45	350	410	32	26	80	24	SN 522	1222 K + H 222	FRB 21/200	2	FS 460	2
														2222 K + H 322	FRB 13.5/200	2
														22222 K + H 322	FRB 13.5/200	2
														23222 K + H 2322	FRB 10/200	1
4 ¼	110	185	120	270	140	45	350	410	32	26	86	24	SN 524	22224 K + H 3124	FRB 14/215	2	FS 460	2
4 ¼	110	185	120	270	140	45	350	410	32	26	86	24	SN 524	23224 K + H 2324	FRB 10/215	1	FS 460	2
4 ½	115	190	130	290	150	50	380	445	35	28	90	24	SN 526	22226 k + H 3126	FRB 13/230	2	FS 460	2
4 ½	115	190	130	290	150	50	380	445	35	28	90	24	SN 526	23226 k + H 2326	FRB 10/230	1	FS 460	2
5	125	205	150	305	150	50	420	500	42	35	98	30	SN 528	22228 K + H 3128	FRB 15/250	2	FS 510	2
5	125	205	150	305	150	50	420	500	42	35	98	30	SN 528	23228 K + H 2328	FRB 10/250	1	FS 510	2
5 ¼	135	220	160	325	160	60	450	530	42	35	106	30	SN 530	22230 K + H 3130	FRB 16.5/270	2	FS 510	2
5 ¼	135	220	160	325	160	60	450	530	42	35	106	30	SN 530	23230 K + H 2330	FRB 10/270	1	FS 510	2
5 ½	140	235	160	345	170	60	470	550	42	35	114	30	SN 532	22232 K + H 3132	FRB 17/290	2	FS 680	2
5 ½	140	235	160	345	170	60	470	550	42	35	114	30	SN 532	23232 K + H 2332	FRB 10/290	1	FS 680	2
6	150	235	170	367	180	65	520	620	42	35	120	30	SN 534	22234 K + H 3134	FRB 17/310	2	FS 680	2
6	150	235	170	367	180	65	520	620	42	35	120	30	SN 534	23234 K + H 2334	FRB 10/310	1	FS 680	2
6 ½	160	245	180	385	190	65	560	650	42	35	122	30	SN 536	22236 K + H 3136	FRB 18/320	2	FS 680	2
6 ½	160	245	180	385	190	65	560	650	42	35	122	30	SN 536	23236 K + H 2336	FRB 10/320	1	FS 680	2
6 ¾	170	255	190	405	200	70	580	680	50	42	130	36	SN 538	22238 K + H 3138	FRB 19/340	2	FS 680	2
6 ¾	170	255	190	405	200	70	580	680	50	42	130	36	SN 538	23238 K + H 2338	FRB 10/340	1	FS 680	2
7	180	265	200	430	210	75	610	720	70	48	138	36	SN 540	22240 K + H 3140	FRB 20/360	2	FS 680	2
7	180	265	200	430	210	75	610	720	70	48	138	36	SN 540	23240 K + H 2340	FRB 10/360	1	FS 680	2
8	200	285	220	480	240	80	680	820	70	48	154	45	SN 544	22244 K + H 3144	FRB 23/400	2	FS 950	2
8	200	285	220	480	240	80	680	820	70	48	154	45	SN 544	23244 K + H 2344	FRB 10/400	1	FS 950	2

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SN 600

Shaft Dia.		Housing Dimensions											Housing Designation	Bearing & Adapter Sleeve	Locating Ring		Felt Strip
d₁		Millimeter												Bearing & Adapter Sleeve	Designation	No.	Designation	No.
inch.	mm.	G	B	H	H₁	C	M	A	N	N₁	CA	S		Designation	Designation	No.	Designation	No.
¾	20	80	52	90	50	22	150	185	25	15	34	12	SN 605	1305 K + H 305	FRB 8.5/62	2	FS 110	2
¾	20	80	52	90	50	22	150	185	25	15	34	12	SN 605	2305 K + H 2305	FRB 10/62	1	FS 110	2
1	25	82	52	95	50	22	150	185	22	17	37	12	SN 606	1306 K + H 306	FRB 9/72	2	FS 190	2
1	25	82	52	95	50	22	150	185	22	17	37	12	SN 606	2306 K + H 2306	FRB 10/72	1	FS 190	2
1 ⅛	30	90	60	110	60	25	170	205	24	17	41	12	SN 607	1307 K + H 307	FRB 10/80	2	FS 190	2
1 ⅛	30	90	60	110	60	25	170	205	24	17	41	12	SN 607	2307 K + H 2307	FRB 10/80	1	FS 190	2
1 ¼	35	95	60	115	60	25	170	205	24	18	43	12	SN 608	1308 K + H 308	FRB 10/90	2	FS 190	2
														2308 K + H 2308	FRB 10/90	1
														21308 K + H 308	FRB 10/90	2
														22308 K + H 2308	FRB 10/90	1
1 ½	40	105	70	130	70	28	210	255	32	20	46	16	SN 609	1309 K + H 309	FRB 10.5/100	2	FS 190	2
														2309 K + H 2309	FRB 10/100	1
														21309 K + H 309	FRB 10.5/100	2
														22309 K + H 2309	FRB 10/100	1
1 ¾	45	115	70	135	70	30	210	255	32	23	50	16	SN 610	1310 K + H 310	FRB 11.5/110	2	FS 190	2
														2310 K + H 2310	FRB 10/110	1
														21310 K + H 310	FRB 11.5/110	2
														22310 K + H 2310	FRB 10/110	1
2	50	120	80	150	80	30	230	275	32	23	53	16	SN 611	1311 K + H 311	FRB 12/120	2	FS 260	2
														2311 K + H 2311	FRB 10/120	1
														21311 K + H 311	FRB 12/120	2
														22311 K + H 2311	FRB 10/120	1
2 ⅛	55	125	80	155	80	30	230	280	35	23	56	16	SN 612	1312 K + H 312	FRB 12.5/130	2	FS 260	2
														2312 K + H 2312	FRB 10/130	1
														21312 K + H 312	FRB 12.5/130	2
														22312 K + H 2312	FRB 10/130	1
2 ¼	60	130	90	175	95	32	260	315	36	23	58	20	SN 613	1313 K + H 313	FRB 12.5/140	2	FS 260	2
														2313 K + H 2313	FRB 10/140	1
														21313 K + H 313	FRB 12.5/140	2
														22313 K + H 2313	FRB 10/140	1

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SN 600

Shaft Dia.		Housing Dimensions											Housing Designation	Bearing & Adapter Sleeve	Locating Ring		Felt Strip
d₁		Millimeter												Bearing & Adapter Sleeve	Designation	No.	Designation	No.
inch.	mm.	G	B	H	H₁	C	M	A	N	N₁	CA	S		Designation	Designation	No.	Designation	No.
2 ⅜	60	130	90	185	95	32	260	320	27	22	61	20	SN 614	1314 K + H 314	FRB 13/150	2	FS 260	2
														2314 K + H 2314	FRB 10/150	1
														21314 K + H 314	FRB 13/150	2
														22314 K + H 2314	FRB 10/150	1
2 ½	65	140	100	195	100	35	290	345	43	23	65	20	SN 615	1315 K + H 315	FRB 14/160	2	FS 260	2
														2315 K + H 2315	FRB 10/160	1
														21315 K + H 315	FRB 14/160	2
														22315 K + H 2315	FRB 10/160	1
2 ¾	70	145	100	210	112	35	290	345	34	24	68	20	SN 616	1316 K + H 316	FRB 14.5/170	2	FS 330	2
														2316 K + H 2316	FRB 10/170	1
														21316 K + H 316	FRB 14.5/170	2
														22316 K + H 2316	FRB 10/170	1
3	75	155	110	215	112	40	320	380	43	27	70	24	SN 617	1317 K + H 317	FRB 14.5/180	2	FS 330	2
														2317 K + H 2317	FRB 10/180	1
														21317 K + H 317	FRB 14.5/180	2
														22317 K + H 2317	FRB 10/180	1
3 ⅛	80	160	110	220	112	40	320	380	43	28	74	24	SN 618	1318 K + H 318	FRB 15.5/190	2	FS 330	2
														2318 K + H 2318	FRB 10/190	1
														21318 K + H 318	FRB 15.5/190	2
														22318 K + H 2318	FRB 10/190	1
3 ¼	85	170	120	240	125	45	350	410	43	28	77	24	SN 619	1319 K + H 319	FRB 16/200	2	FS 370	2
														2319 K + H 2319	FRB 10/200	1
														21319 K + H 319	FRB 16/200	2
														22319 K + H 2319	FRB 10/200	1
3 ½	90	175	120	270	140	45	350	410	43	33	83	24	SN 620	1320 K + H 320	FRB 18/215	2	FS 370	2
														2320 K + H 2320	FRB 10/215	1
														21320 K + H 320	FRB 18/215	2
														22320 K + H 2320	FRB 10/215	1
4	100	190	130	295	150	50	390	450	43	31	90	24	SN 622	2322 K + H 2322	FRB 10/240	1	FS 460	2
														20322 K + H 322	FRB 20/240	2
														21322 K + H 322	FRB 20/240	2
														22322 K + H 2322	FRB 10/240	1
4 ¼	110	200	160	320	160	60	450	530	56	37	96	30	SN 624	20324 K + H 3124	FRB 20.5/260	2	FS 460	2
4 ¼	110	200	160	320	160	60	450	530	56	37	96	30	SN 624	22324 K + H 2324	FRB 10/260	1	FS 460	2
4 ½	115	210	160	340	170	60	470	550	60	37	103	30	SN 626	20326 K + H 3126	FRB 22.5/280	2	FS 460	2
4 ½	115	210	160	340	170	60	470	550	60	37	103	30	SN 626	22326 K + H 2326	FRB 10/280	1	FS 460	2
5	125	235	170	367	180	65	520	620	75	39	112	30	SN 628	20328 K + H 3128	FRB 25/300	2	FS 510	2
5	125	235	170	367	180	65	520	620	75	39	112	30	SN 628	22328 K + H 2328	FRB 10/300	1	FS 510	2
5 ¼	135	245	180	385	190	65	560	650	75	39	118	30	SN 630	20330 K + H 3130	FRB 26.5/320	2	FS 510	2
5 ¼	135	245	180	385	190	65	560	650	75	39	118	30	SN 630	22330 K + H 2330	FRB 10/320	1	FS 510	2
5 ½	140	255	190	405	200	70	580	680	75	39	124	30	SN 632	20332 K + H 3132	FRB 28/340	2	FS 680	2
5 ½	140	255	190	405	200	70	580	680	75	39	124	30	SN 632	22332 K + H 2332	FRB 10/340	1	FS 680	2

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNA 500

Shaft Dia.		Housing Dimensions															Designation Type			Bearing and Adapter Sleeve	Locating Ring
d₁		Millimeter															TA	TC	TG	Bearing and Adapter Sleeve	Designation	No.
inch	MM.	A	A₁	A₄	Ca	D	D_a	D_b	H	H₁	H₂	J	L	N	N₁	G	TA	TC	TG		Designation	No.
¾	20	67	46	5	25	52	31	39.5	71	40	19	130	165	20	13	10	SNA 505 TA	SNA 505 TC	SNA 505 TG	1205 K + H 205	FRB 5/52	2
¾	20	67	46	5	25	52	31	39.5	71	40	19	130	165	20	13	10	SNA 505 TA	SNA 505 TC	SNA 505 TG	2205 K + H 305	FRB 7/52	1
1	25	77	52	5	32	62	36.5	44.5	87	50	22	150	185	22	13	10	SNA 506 TA	SNA 506 TC	SNA 506 TG	1206 K + H 206	FRB 6/62	2
1	25	77	52	5	32	62	36.5	44.5	87	50	22	150	185	22	13	10	SNA 506 TA	SNA 506 TC	SNA 506 TG	2206 K + H 306	FRB 6/62	2
1 ⅛	30	82	52	5	34	72	46.5	54.5	92	50	22	150	185	20	13	10	SNA 507 TA	SNA 507 TC	SNA 507 TG	1207 K + H 207	FRB 8.5/72	2
1 ⅛	30	82	52	5	34	72	46.5	54.5	92	50	22	150	185	20	13	10	SNA 507 TA	SNA 507 TC	SNA 507 TG	2207 K + H 307	FRB 5.5/72	2
1 ¼	35	85	60	5	39	80	51.5	59.5	106	60	25	170	205	20	15	12	SNA 508 TA	SNA 508 TC	SNA 508 TG	1208 K + H 208	FRB 10.5/80	2
																				2208 K + H 308	FRB 8/80	2
																				22208 K + H 308	FRB 8/80	2
1 ½	40	85	60	5	30	85	56.5	64.5	109	60	25	170	205	20	15	12	SNA 509 TA	SNA 509 TC	SNA 509 TG	1209 K + H 209	FRB 5.5/85	2
																				2209 K + H 309	FRB 7/85	1
																				22209 K + H 309	FRB 7/85	1
1 ¾	45	90	60	5	41	90	62	70.5	112	60	25	170	205	20	15	12	SNA 510 TA	SNA 510 TC	SNA 510 TG	1210 K + H 210	FRB 10.5/90	2
																				2210 K + H 310	FRB 9/90	2
																				22210 K + H 310	FRB 9/90	2
2	50	95	70	5	44	100	67	75.5	127	70	28	210	255	23	18	16	SNA 511 TA	SNA 511 TC	SNA 511 TG	1211 K + H 211	FRB 11.5/100	2
																				2211 K + H 311	FRB 9.5/100	2
																				22211 K + H 311	FRB 9.5/100	2
2 ⅛	55	105	70	5	48	110	72	80.5	133	70	30	210	255	23	18	16	SNA 512 TA	SNA 512 TC	SNA 512 TG	1212 K + H 212	FRB 13/110	2
																				2212 K + H 312	FRB 10/110	2
																				22212 K + H 312	FRB 10/110	2

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNA 500

Shaft Dia.		Housing Dimensions															Designation Type			Bearing and Adapter Sleeve	Locating Ring
d₁		Millimeter															TA	TC	TG	Bearing and Adapter Sleeve	Designation	No.
inch	MM.	A	A₁	A₄	Ca	D	D_a	D_b	H	H₁	H₂	J	L	N	N₁	G	TA	TC	TG		Designation	No.
2 ¼	60	110	80	5	51	120	77	85.5	148	80	30	230	275	24	18	16	SNA 513 TA	SNA 513 TC	SNA 513 TG	1213 K + H 213	FRB 14/120	2
																				2213 K + H 313	FRB 10/120	2
																				22213 K + H 313	FRB 10/120	2
2 ½	65	115	80	5	56	130	87	95.5	154	80	30	230	280	26	18	16	SNA 515 TA	SNA 515 TC	SNA 515 TG	1215 K + H 215	FRB 15.5/130	2
																				2215 K + H 315	FRB 12.5/130	2
																				22215 K + H 315	FRB 12.5/130	2
2 ¾	70	120	90	5	58	140	92.5	101	175	95	32	260	315	29	22	20	SNA 516 TA	SNA 516 TC	SNA 516 TG	1216 K + H 216	FRB 16/140	2
																				2216 K + H 316	FRB 12.5/140	2
																				22216 K + H 316	FRB 12.5/140	2
3	75	125	90	5	61	150	97.5	106	181	95	32	260	320	30	22	20	SNA 517 TA	SNA 517 TC	SNA 517 TG	1217 K + H 217	FRB 16.5/150	2
																				2217 K + H 317	FRB 12.5/150	2
																				22217 K + H 317	FRB 12.5/150	2
3 ⅛	80	140	100	5	65	160	102.5	111	192	100	35	290	345	27	22	20	SNA 518 TA	SNA 518 TC	SNA 518 TG	1218 K + H 218	FRB 17.5/160	2
																				2218 K + H 318	FRB 12.5/160	2
																				22218 K + H 318	FRB 12.5/160	2
																				23218 K + H 2318	FRB 12.5/160	1
3 ¼	85	145	100	6	68	170	131	141	209	112	35	290	345	27	22	20	SNA 519 TA	SNA 519 TC	SNA 519 TG	1219 K + H 219	FRB 18/170	2
																				2219 K + H 319	FRB 12.5/170	2
																				22219 K + H 319	FRB 12.5/170	2
3 ½	90	160	110	6	70	180	137.5	147.5	215	112	40	320	380	32	26	24	SNA 520 TA	SNA 520 TC	SNA 520 TG	1220 K + H 220	FRB 18/180	2
																				2220 K + H 320	FRB 12/180	2
																				22220 K + H 320	FRB 12/180	2
																				23220 K + H 2320	FRB 9.7/180	1
4	100	175	120	6	80	200	147.5	157.5	239	125	45	350	410	32	26	24	SNA 522 TA	SNA 522 TC	SNA 522 TG	1222 K + H 222	FRB 21/200	2
																				2222 K + H 322	FRB 13.5/200	2
																				22222 K + H 322	FRB 13.5/200	2
																				23222 K + H 2322	FRB 10/200	1
4 ¼	110	185	120	6	86	215	157.5	167.5	271	140	45	350	410	32	26	24	SNA 524 TA	SNA 524 TC	SNA 524 TG	22224 K + H 3124	FRB 14/215	2
4 ¼	110	185	120	6	86	215	157.5	167.5	271	140	45	350	410	32	26	24	SNA 524 TA	SNA 524 TC	SNA 524 TG	23224 K + H 2324	FRB 10/215	1
4 ½	115	190	130	6	90	230	167.5	177.5	290	150	50	380	445	35	28	24	SNA 526 TA	SNA 526 TC	SNA 526 TG	22226 K + H 3126	FRB 13/230	2
4 ½	115	190	130	6	90	230	167.5	177.5	290	150	50	380	445	35	28	24	SNA 526 TA	SNA 526 TC	SNA 526 TG	23226 K + H 2326	FRB 10/230	1
5	125	205	150	6	98	250	177.5	187.5	302	150	50	420	500	42	35	30	SNA 528 TA	SNA 528 TC	SNA 528 TG	22228 K + H 3128	FRB 15/250	2
5	125	205	150	6	98	250	177.5	187.5	302	150	50	420	500	42	35	30	SNA 528 TA	SNA 528 TC	SNA 528 TG	23228 K + H 2328	FRB 10/250	1
5 ¼	135	220	160	6	106	270	192.5	202.5	323	160	60	450	530	42	35	30	SNA 530 TA	SNA 530 TC	SNA 530 TG	22230 K + H 3130	FRB 16.5/270	2
5 ¼	135	220	160	6	106	270	192.5	202.5	323	160	60	450	530	42	35	30	SNA 530 TA	SNA 530 TC	SNA 530 TG	23230 K + H 2330	FRB 10/270	1
5 ½	140	235	160	6	114	290	202.5	212.5	344	170	60	470	550	42	35	30	SNA 532 TA	SNA 532 TC	SNA 532 TG	22232 K + H 3132	FRB 17/290	2
5 ½	140	235	160	6	114	290	202.5	212.5	344	170	60	470	550	42	35	30	SNA 532 TA	SNA 532 TC	SNA 532 TG	23232 K + H 2332	FRB 10/290	1

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNA 600

Shaft Dia.		Housing Dimensions															Designation Type			Bearing and Adapter Sleeve	Locating Ring
d₁		Millimeter															TA	TC	TG	Bearing and Adapter Sleeve	Designation	No.
inch	MM.	A	A₁	A₄	Ca	D	D_a	D_b	H	H₁	H₂	J	L	N	N₁	G	TA	TC	TG		Designation	No.
¾	20	77	52	5	32	62	36.5	44.5	87	50	22	150	185	22	13	10	SNA 605 TA	SNA 605 TC	SNA 605 TG	1305 K + H 305	FRB 7.5/62	2
¾	20	77	52	5	32	62	36.5	44.5	87	50	22	150	185	22	13	10	SNA 605 TA	SNA 605 TC	SNA 605 TG	2305 K + H 2305	FRB 8/62	1
1	25	82	52	5	34	72	46.5	54.5	92	50	22	150	185	20	13	10	SNA 606 TA	SNA 606 TC	SNA 606 TG	1306 K + H 306	FRB 7.5/72	2
1	25	82	52	5	34	72	46.5	54.5	92	50	22	150	185	20	13	10	SNA 606 TA	SNA 606 TC	SNA 606 TG	2306 K + H 2306	FRB 7/72	1
1 ⅛	30	85	60	5	39	80	51.5	59.5	106	60	25	170	205	20	15	12	SNA 607 TA	SNA 607 TC	SNA 607 TG	1307 K + H 307	FRB 9/80	2
1 ⅛	30	85	60	5	39	80	51.5	59.5	106	60	25	170	205	20	15	12	SNA 607 TA	SNA 607 TC	SNA 607 TG	2307 K + H 2307	FRB 8/80	1
1 ¼	35	90	60	5	41	90	62	70.5	112	60	25	170	205	20	15	12	SNA 608 TA	SNA 608 TC	SNA 608 TG	1308 K + H 308	FRB 9/90	2
																				2308 K + H 2308	FRB 8/90	1
																				21308 K + H 308	FRB 9/90	2
																				22308 K + H 2308	FRB 8/90	2
1 ½	40	95	70	5	44	100	67	75.5	127	70	28	210	255	23	18	16	SNA 609 TA	SNA 609 TC	SNA 609 TG	1309 K + H 309	FRB 9.5/100	2
																				2309 K + H 2309	FRB 8/100	1
																				21309 K + H 309	FRB 9.5/100	2
																				22309 K + H 2309	FRB 8/100	1
1 ¾	45	105	70	5	48	110	72	80.5	133	70	30	210	255	23	18	16	SNA 610 TA	SNA 610 TC	SNA 610 TG	1310 K + H 310	FRB 10.5/110	2
																				2310 K + H 2310	FRB 8/110	1
																				21310 K + H 310	FRB 11/120	2
																				22310 K + H 2310	FRB 8/110	1
2	50	110	80	5	51	120	77	85.5	148	80	30	230	275	24	18	16	SNA 611 TA	SNA 611 TC	SNA 611 TG	1311 K + H 311	FRB 11/120	2
																				2311 K + H 2311	FRB 8/120	1
																				21311 K + H 311	FRB 11/120	2
																				22311 K + H 2311	FRB 8/120	1
2 ⅛	55	115	80	5	56	130	87	95.5	154	80	30	230	280	26	18	16	SNA 612 TA	SNA 612 TC	SNA 612 TG	1312 K + H 312	FRB 12.5/130	2
																				2312 K + H 2312	FRB 10/130	1
																				21312 K + H 312	FRB 12.5/130	2
																				22312 K + H 2312	FRB 10/130	1

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNA 600

Shaft Dia.		Housing Dimensions															Designation Type			Bearing and Adapter Sleeve	Locating Ring
d₁		Millimeter															TA	TC	TG	Bearing and Adapter Sleeve	Designation	No.
inch	MM.	A	A₁	A₄	Ca	D	D_a	D_b	H	H₁	H₂	J	L	N	N₁	G	TA	TC	TG		Designation	No.
2 ¼	60	120	90	5	58	140	92.5	101	175	95	32	260	315	29	22	20	SNA 613 TA	SNA 613 TC	SNA 613 TG	1313 K + H 313	FRB 12.5/140	2
																				2313 K + H 2313	FRB 10/140	1
																				21313 K + H 313	FRB 12.5/140	2
																				22313 K + H 2313	FRB 10/140	1
2 ½	65	140	100	5	65	160	102.5	111	192	100	35	290	345	27	22	20	SNA 615 TA	SNA 615 TC	SNA 615 TG	1315 K + H 315	FRB 14/160	2
																				2315 K + H 2315	FRB 10/160	1
																				21315 K + H 315	FRB 14/160	2
																				22315 K + H 2315	FRB 10/160	1
2 ¾	70	145	100	6	68	170	131	141	209	112	35	290	345	27	22	20	SNA 616 TA	SNA 616 TC	SNA 616 TG	1316 K + H 316	FRB 14.5/170	2
																				2316 K + H 2316	FRB 10/170	1
																				21316 K + H 316	FRB 14.5/170	2
																				22316 K + H 2316	FRB 10/170	1
3	75	160	110	6	70	180	137.5	147.5	215	112	40	320	380	32	26	24	SNA 617 TA	SNA 617 TC	SNA 617 TG	1317 K + H 317	FRB 14.5/180	2
																				2317 K + H 2317	FRB 10/180	1
																				21317 K + H 317	FRB 14.5/180	2
																				22317 K + H 2317	FRB 10/180	1
3 ⅛	80	165	110	6	74	190	142.5	152.5	220	112	40	320	380	32	26	24	SNA 618 TA	SNA 618 TC	SNA 618 TG	1318 K + H 318	FRB 15.5/190	2
																				2318 K + H 2318	FRB 10/190	1
																				21318 K + H 318	FRB 15.5/190	2
																				22318 K + H 2318	FRB 10/190	1
3 ¼	85	175	120	6	80	200	147.5	157.5	239	125	45	350	410	32	26	24	SNA 619 TA	SNA 619 TC	SNA 619 TG	1319 K + H 319	FRB 17.5/200	2
																				2319 K + H 2319	FRB 13/200	1
																				21319 K + H 319	FRB 17.5/200	2
																				22319 K + H 2319	FRB 13/200	1
3 ½	90	185	120	6	86	215	157.5	167.5	271	140	45	350	410	32	26	24	SNA 620 TA	SNA 620 TC	SNA 620 TG	1320 K + H 320	FRB 19.5/215	2
																				2320 K + H 2320	FRB 13/215	1
																				21320 K + H 320	FRB 19.5/215	2
																				22320 K + H 2320	FRB 13/215	1
4	100	190	130	86	90	240	167.5	--	290	150	50	380	445	28	24	24	SNA 622 TA	SNA 622 TC	SNA 622 TG	21322 K + H 322	FRB 20/240	2
4	100	190	130	86	90	240	167.5	--	290	150	50	380	445	28	24	24	SNA 622 TA	SNA 622 TC	SNA 622 TG	22322 K + H 2322	FRB 10/240	1

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNH 500 and SNH 600

Shaft Dia. d_a MM.	Dimensions												Designations Housing with				Bearing	Adapter Sleeve	Locating Ring
	MM												Double-lip seals	V-ring seals	felt seals	labyrinth seals	Bearing	Adapter Sleeve	No.	Designation
	A	A₁	C_a	D_a	H	H₁	H₂	J	L	N	N₁	G	Double-lip seals	V-ring seals	felt seals	labyrinth seals	Designation	Designation	No.	Designation
20	67	46	25	52	74	40	19	130	165	20	15	12	SNH 505 TG	SNH 505 TA	SNH 505 TC	SNH 505 TS	1205 EK	H 205	2	FRB 5/52
																	2205 EK	H 305	2	FRB 3.5/52
																	22205 EK	H 305	2	FRB 3.5/52
20	77	52	32	62	89	50	22	150	185	20	15	12	SNH 605 TG	SNH 605 TA	SNH 605 TC	SNH 605 TS	1305 EK	H 305	2	FRB 7.5/62
20	77	52	32	62	89	50	22	150	185	20	15	12	SNH 605 TG	SNH 605 TA	SNH 605 TC	SNH 605 TS	2305 K	H 2305	2	FRB 4/62
25	77	52	32	62	89	50	22	150	185	20	15	12	SNH 506 TG	SNH 506 TA	SNH 506 TC	SNH 506 TS	1206 EK	H 206	2	FRB 8/62
																	2206 EK	H 306	2	FRB 6/62
																	22206 EK	H 306	2	FRB 6/62
25	82	52	34	72	93	50	22	150	185	20	15	12	SNH 606 TG	SNH 606 TA	SNH 606 TC	SNH 606 TS	1306 EK	H 306	2	FRB 7.5/72
25	82	52	34	72	93	50	22	150	185	20	15	12	SNH 606 TG	SNH 606 TA	SNH 606 TC	SNH 606 TS	2306 K	H 2306	2	FRB 3.5/72
30	82	52	34	72	93	50	22	150	185	20	15	12	SNH 507 TG	SNH 507 TA	SNH 507 TC	SNH 507 TS	1207 EK	H 207	2	FRB 8.5/72
																	2207 EK	H 307	2	FRB 5.5/72
																	22207 EK	H 307	2	FRB 5.5/72
30	85	60	39	80	107	60	25	170	205	20	15	12	SNH 607 TG	SNH 607 TA	SNH 607 TC	SNH 607 TS	1307 EK	H 307	2	FRB 9/80
30	85	60	39	80	107	60	25	170	205	20	15	12	SNH 607 TG	SNH 607 TA	SNH 607 TC	SNH 607 TS	2307 EK	H 2307	2	FRB 4/80
35	85	60	39	80	107	60	25	170	205	20	15	12	SNH 508 TG	SNH 508 TA	SNH 508 TC	SNH 508 TS	1208 EK	H 208	2	FRB 10.5/80
																	2208 EK	H 308	2	FRB 8/80
																	22208 EK	H 308	2	FRB 8/80
35	90	60	41	90	113	60	25	170	205	20	15	12	SNH 608 TG	SNH 608 TA	SNH 608 TC	SNH 608 TS	1308 EK	H 308	2	FRB 9/90
																	2308 EK	H 2308	2	FRB 4/90
																	21308 CCK	H 308	2	FRB 9/90
																	22308 EK	H 2308	2	FRB 4/90

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNH 500 and SNH 600

Shaft Dia. d_a MM.	Dimensions												Designations Housing with				Bearing	Adapter Sleeve	Locating Ring
	MM												Double-lip seals	V-ring seals	felt seals	labyrinth seals	Bearing	Adapter Sleeve	No.	Designation
	A	A₁	C_a	D_a	H	H₁	H₂	J	L	N	N₁	G	Double-lip seals	V-ring seals	felt seals	labyrinth seals	Designation	Designation	No.	Designation
40	85	60	30	85	109	60	25	170	205	20	15	12	SNH 509 TG	SNH 509 TA	SNH 509 TC	SNH 509 TS	1209 EK	H 209	2	FRB 5.5/85
																	2209 EK	H 309	2	FRB 3.5/85
																	22209 EK	H 309	2	FRB 3.5/85
40	95	70	44	100	127	70	28	210	255	24	18	16	SNH 609 TG	SNH 609 TA	SNH 609 TC	SNH 609 TS	1309 EK	H 309	2	FRB 9.5/100
																	2309 K	H 2309	2	FRB 4/100
																	21309 CCK	H 309	2	FRB 9.5/100
																	22309 EK	H 2309	2	FRB 4/100
45	90	60	41	90	113	60	25	170	205	20	15	12	SNH 510 TG	SNH 510 TA	SNH 510 TC	SNH 510 TS	1210 EK	H 210	2	FRB 10.5/90
																	2210 EK	H 310	2	FRB 9/90
																	22210 EK	H 310	2	FRB 9/90
45	105	70	48	110	133	70	30	210	255	24	18	16	SNH 610 TG	SNH 610 TA	SNH 610 TC	SNH 610 TS	1310 EK	H 310	2	FRB 10.5/110
																	2310 K	H 2310	2	FRB 4/110
																	21310 CCK	H 310	2	FRB 10.5/110
																	22310 EK	H 2310	2	FRB 4/110
50	95	70	44	100	127	70	28	210	255	24	18	16	SNH 511 TG	SNH 511 TA	SNH 511 TC	SNH 511 TS	1211 EK	H 211	2	FRB 11.5/100
																	2211 EK	H 311	2	FRB 9.5/100
																	22211 EK	H 311	2	FRB 9.5/100
50	110	80	51	120	148	80	30	230	275	24	18	16	SNH 611 TG	SNH 611 TA	SNH 611 TC	SNH 611 TS	1311 EK	H 311	2	FRB 11/120
																	2311 K	H 2311	2	FRB 4/120
																	21311 CCK	H 311	2	FRB 11/120
																	22311 EK	H 2311	2	FRB 4/120
55	105	70	48	110	133	70	30	210	255	24	18	16	SNH 512 TG	SNH 512 TA	SNH 512 TC	SNH 512 TS	1212 EK	H 212	2	FRB 13/110
																	2212 EK	H 312	2	FRB 10/110
																	22212 EK	H 312	2	FRB 10/110
55	115	80	56	130	154	80	30	230	280	24	18	16	SNH 612 TG	SNH 612 TA	SNH 612 TC	SNH 612 TS	1312 K	H 312	2	FRB 12.5/130
																	2312 K	H 2312	2	FRB 5/130
																	21312 CCK	H 312	2	FRB 12.5/130
																	22312 EK	H 2312	2	FRB 5/130
60	110	80	51	120	148	80	30	230	275	24	18	16	SNH 513 TG	SNH 513 TA	SNH 513 TC	SNH 513 TS	1213 EK	H 213	2	FRB 14/120
																	2213 EK	H 313	2	FRB 10/120
																	22213 EK	H 313	2	FRB 10/120
60	120	90	58	140	175	95	32	260	315	28	22	20	SNH 613 TG	SNH 613 TA	SNH 613 TC	SNH 613 TS	1313 EK	H 313	2	FRB 12.5/140
																	2313 K	H 2313	2	FRB 5/140
																	21313 CCK	H 313	2	FRB 12.5/140
																	22313 EK	H 2313	2	FRB 5/140

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNH 500 and SNH 600

Shaft Dia. d_a MM.	Dimensions												Designations Housing with				Bearing	Adapter Sleeve	Locating Ring
	MM												Double-lip seals	V-ring seals	felt seals	labyrinth seals	Bearing	Adapter Sleeve	No.	Designation
	A	A₁	C_a	D_a	H	H₁	H₂	J	L	N	N₁	G	Double-lip seals	V-ring seals	felt seals	labyrinth seals	Designation	Designation	No.	Designation
65	115	80	56	130	154	80	30	230	280	24	18	16	SNH 515 TG	SNH 515 TA	SNH 515 TC	SNH 515 TS	1215 K	H 215	2	FRB15.5/130
																	2215 K	H 315	2	FRB12.5/130
																	22215 EK	H 315	2	FRB12.5/130
65	140	100	65	160	193	100	35	290	345	28	22	20	SNH 615 TG	SNH 615 TA	SNH 615 TC	SNH 615 TS	1315 K	H 315	2	FRB 14/160
																	2315 K	H 2315	2	FRB 5/160
																	21315 CCK	H 315	2	FRB 14/160
																	22315 EK	H 2315	2	FRB 5/160
70	120	90	58	140	175	95	32	260	315	28	22	20	SNH 516 TG	SNH 516 TA	SNH 516 TC	SNH 516 TS	1216 K	H 216	2	FRB 16/140
																	2216 EK	H 316	2	FRB 12.5/140
																	22216 EK	H 316	2	FRB12.5/140
70	145	100	68	170	210	112	35	290	345	28	22	20	SNH 616 TG	SNH 616 TA	SNH 616 TC	SNH 616 TS	1316 K	H 316	2	FRB14.5/170
																	2316 K	H 2316	2	FRB 5/170
																	21316 CCK	H 316	2	FRB14.5/170
																	22316 K	H 2316	2	FRB 5/170
75	125	90	61	150	183	95	32	260	320	28	22	20	SNH 517 TG	SNH 517 TA	SNH 517 TC	SNH 517 TS	1217 K	H 217	2	FRB16.5/150
																	2217 K	H 317	2	FRB12.5/150
																	22217 EK	H 317	2	FRB12.5/150
75	160	110	70	180	215	112	40	320	380	32	26	24	SNH 617 TG	SNH 617 TA	SNH 617 TC	SNH 617 TS	1317 K	H 317	2	FRB14.5/180
																	2317 K	H 2317	2	FRB 5/180
																	22317 K	H 2317	2	FRB 5/180
																	21317 K	H 317	2	FRB 14.5/180

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNH 500 and SNH 600

Shaft Dia. d_a MM.	Dimensions												Designations Housing with				Bearing	Adapter Sleeve	Locating Ring
	MM												Double-lip seals	V-ring seals	felt seals	labyrinth seals	Bearing	Adapter Sleeve	No.	Designation
	A	A₁	C_a	D_a	H	H₁	H₂	J	L	N	N₁	G	Double-lip seals	V-ring seals	felt seals	labyrinth seals	Designation	Designation	No.	Designation
80	140	100	65	160	193	100	35	290	345	28	22	20	SNH 518 TG	SNH 518 TA	SNH 518 TC	SNH 518 TS	1218 K	H 218	2	FRB17.5/160
																	2218 K	H 318	2	FRB12.5/160
																	22218 EK	H 318	2	FRB12.5/160
																	23218 CCK	H 2318	2	FRB 6.25/160
85	145	100	68	170	210	112	35	290	345	28	22	20	SNH 519 TG	SNH 519 TA	SNH 519 TC	SNH 519 TS	1219 K	H 219	2	FRB 18/170
																	2219 K	H 319	2	FRB 12.5/170
																	22219 EK	H 319	2	FRB 12.5/170
85	175	120	80	200	239	125	45	350	410	32	26	24	SNH 619 TG	SNH 619 TA	SNH 619 TC	SNH 619 TS	1319 K	H 319	2	FRB 17.5/200
																	2319 K	H 2319	2	FRB 6.5/200
																	21319 CCK	H 319	2	FRB 17.5/200
																	22319 EK	H 2319	2	FRB 6.5/200
90	160	110	70	180	215	112	40	320	380	32	26	24	SNH 520 TG	SNH 520 TA	SNH 520 TC	SNH 520 TS	1220 K	H 220	2	FRB 18/180
																	2220 K	H 320	2	FRB 12/180
																	22220 EK	H 320	2	FRB 12/180
																	23220 CCK	H 2320	2	FRB 4.85/180
90	185	120	86	215	271	140	45	350	410	32	26	24	SNH 620 TG	SNH 620 TA	SNH 620 TC	SNH 620 TS	1320 K	H 320	2	FRB 19.5/215
																	2320 K	H 2320	2	FRB 6.5/215
																	21320 CCK	H 320	2	FRB 19.5/215
																	22320 EK	H 2320	2	FRB 6.5/215
100	175	120	80	200	239	125	45	350	410	32	26	24	SNH 522 TG	SNH 522 TA	SNH 522 TC	SNH 522 TS	1222 K	H 222	2	FRB 21/200
																	2222 K	H 322	2	FRB 13.5/200
																	22222 CCK	H 322	2	FRB 13.5/200
																	23222 CCK	H 2322	2	FRB 5.1/200
110	185	120	86	215	271	140	45	350	410	32	26	24	SNH 524 TG	SNH 524 TA	SNH 524 TC	SNH 524 TS	1224 K	H 3124	2	FRB 22/215
																	22224 EK	H 3124	2	FRB 13.5/215
																	23224 CCK	H 2324	2	FRB 5/215
115	190	130	90	230	290	150	50	380	445	35	28	24	SNH 526 TG	SNH 526 TA	SNH 526 TC	SNH 526 TS	22226 EK	H 3126	2	FRB 13/230
115	190	130	90	230	290	150	50	380	445	35	28	24	SNH 526 TG	SNH 526 TA	SNH 526 TC	SNH 526 TS	23226 CCK	H 2326	2	FRB 5/230
125	205	150	98	250	302	150	50	420	500	42	35	30	SNH 528 TG	SNH 528 TA	SNH 528 TC	SNH 528 TS	22228 CCK	H 3128	2	FRB 15/250
125	205	150	98	250	302	150	50	420	500	42	35	30	SNH 528 TG	SNH 528 TA	SNH 528 TC	SNH 528 TS	23228 CCK	H 2328	2	FRB 5/250
135	220	160	106	270	323	160	60	450	530	42	35	30	SNH 530 TG	SNH 530 TA	SNH 530 TC	SNH 530 TS	22230 CCK	H 3130	2	FRB 16.5/270
135	220	160	106	270	323	160	60	450	530	42	35	30	SNH 530 TG	SNH 530 TA	SNH 530 TC	SNH 530 TS	23230 CCK	H 2330	2	FRB 5/270
140	235	160	114	290	344	170	60	470	550	42	35	30	SNH 532 TG	SNH 532 TA	SNH 532 TC	SNH 532 TS	22232 CCK	H 3132	2	FRB 17/290
140	235	160	114	290	344	170	60	470	550	42	35	30	SNH 532 TG	SNH 532 TA	SNH 532 TC	SNH 532 TS	23232 CCK	H 2332	2	FRB 5/290

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNL 500

Shaft d_a mm	Housing Dimension										Designations Housing Complete with two seal	Bearing Seating		Width Across Seal		Appropriate bearings and associated components
Shaft d_a mm	A mm	A₁	H	H₁	H₂	J	L	N	N₁	G	Designations Housing Complete with two seal	C_a	D_a	A₂	A₃	self-aligning ball bearing spherical roller bearing	Adapter sleeve	Locating rings 2 per housing
20	67	46	74	40	19	130	165	20	15	12	SNL 505 TG	25	52	80	125	1205EK	H 205	FRB 5/52
20	67	46	74	40	19	130	165	20	15	12	SNL 505 TG	25	52	80	125	2205 EK/22205/CCK/W33	H 305	FRB 3.5/5
25	77	52	89	50	22	150	185	20	15	12	SNL 506 TG	32	62	89	135	1206 EK	H 206	FRB 8/62
25	77	52	89	50	22	150	185	20	15	12	SNL 506 TG	32	62	89	135	2206 EK/22206/CCK/W33	H 306	FRB 6/62
30	82	52	93	50	22	150	185	20	15	12	SNL 507 TG	34	72	94	145	1207 EK	H 207	FRB 8.5/72
30	82	52	93	50	22	150	185	20	15	12	SNL 507 TG	34	72	94	145	2207 EK /22207 CCK/W33	H 307	FRB 5.5/72
35	85	60	108	60	25	170	205	20	15	12	SNL 508 TG	39	80	97	150	1208 EK	H 208	FRB /10.5/80
35	85	60	108	60	25	170	205	20	15	12	SNL 508 TG	39	80	97	150	2208 EK/22208 EK	H 308	FRB 8/80
40	85	60	109	60	25	170	205	20	15	12	SNL 509 TG	30	85	97	150	1209 EK	H 209	FRB 5.5/85
40	85	60	109	60	25	170	205	20	15	12	SNL 509 TG	30	85	97	150	2209 EK/22209 CCK/W33	H 309	FRB 3.5/85
45	90	60	113	60	25	170	205	20	15	12	SNL 510 TG	41	90	102	155	1210 EK	H 210	FRB 10.5/90
45	90	60	113	60	25	170	205	20	15	12	SNL 510 TG	41	90	102	155	2210 EK /22210 CCK/W33	H 310	FRB 9/90
50	95	70	128	70	28	210	255	24	18	16	SNL 511 TG	44	100	107	165	1211 EK	H 211	FRB 11.5/100
50	95	70	128	70	28	210	255	24	18	16	SNL 511 TG	44	100	107	165	2211 EK / 22211 K	H 311	FRB 9.5/100
55	105	70	134	70	30	210	255	24	18	16	SNL 512 TG	48	110	117	175	1212 EK	H 212	FRB 13/110
55	105	70	134	70	30	210	255	24	18	16	SNL 512 TG	48	110	117	175	2212 EK / 22212 EK	H 312	FRB 10/110

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNL 500 (Continued)

Shaft d_a mm	Housing Dimension										Designations Housing Complete with two seal	Bearing Seating		Width Across Seal		Appropriate bearings and associated components
Shaft d_a mm	A mm	A₁	H	H₁	H₂	J	L	N	N₁	G	Designations Housing Complete with two seal	C_a	D_a	A₂	A₃	self-aligning ball bearing spherical roller bearing	Adapter sleeve	Locating rings 2 per housing
60	110	80	149	80	30	230	275	24	18	16	SNL 513 TG	51	120	122	180	1213 EK	H 213	FRB 14/120
60	110	80	149	80	30	230	275	24	18	16	SNL 513 TG	51	120	122	180	2213 EK / 22213 CCK/W33	H 313	FRB 10/120
60	115	80	155	80	30	230	280	24	18	16	SNL 514 TG	51	125	127	175	1214 K	H 214	FRB 13/125
60	115	80	155	80	30	230	280	24	18	16	SNL 514 TG	51	125	127	175	2214 K 22214 CK	H 314	FRB 10/125
65	115	80	155	80	30	230	280	24	18	16	SNL 515 TG	56	130	127	175	1215 K	H 215	FRB 15.5/130
65	115	80	155	80	30	230	280	24	18	16	SNL 515 TG	56	130	127	175	2215 EK / 22215 EK	H 315	FRB 12.5/130
70	120	90	177	95	32	260	315	28	22	20	SNL 516 TG	58	140	138	205	1216 K	H 216	FRB 16/140
70	120	90	177	95	32	260	315	28	22	20	SNL 516 TG	58	140	138	205	2216 EK / 22216 EK	H 316	FRB 12.5/140
75	125	90	183	95	32	260	320	28	22	20	SNL 517 TG	61	150	143	210	1217 K	H 217	FRB 16.5/150
75	125	90	183	95	32	260	320	28	22	20	SNL 517 TG	61	150	143	210	2217 K / 22217 EK	H 317	FRB 12.5/150
80	140	100	194	100	35	290	345	28	22	20	SNL 518 TG	65	160	158	225	1218 K	H 218	FRB 17.5/160
																2218 K / 22218 EK	H 318	FRB 12.5/160
																23218 CCK/W33	H 2318	FRB 6.25/160
85	145	100	212	112	35	290	345	28	22	20	SNL 519 TG	68	170	163	220	1219 K	H 219	FRB 18/170
85	145	100	212	112	35	290	345	28	22	20	SNL 519 TG	68	170	163	220	2219 K / 22219 EK	H 319	FRB 12.5/170
90	160	110	218	112	40	320	380	32	26	24	SNL 520 TG	70	180	178	230	1220 K	H 220	FRB 18/180
																2220 K / 22220 EK	H 320	FRB 12/180
																23220 CCK/W33	H 2320	FRB 4.85/180
100	175	120	242	125	45	350	410	32	26	24	SNL 522 TG	80	200	191	250	1222 K	H 222	FRB /21/200
																2222 K / 22222 EK	H 322	FRB 13.50/200
																23222 CCK/W33	H 2322	FRB 5.1/200
110	185	120	271	140	45	350	410	32	26	24	SNL 524 TG	86	215	199	260	1224 K	H 3024	FRB 22/215
																22224 EK	H 3124	FRB 14/215
																23224 CCK/W33	H 2324	FRB 5/215
115	190	130	290	150	50	380	445	35	28	24	SNL 526 TG	90	230	208	265	22226 EK	H 3126	FRB 13/230
115	190	130	290	150	50	380	445	35	28	24	SNL 526 TG	90	230	208	265	23226 CCK/W33	H 2326	FRB 5/230
125	205	150	302	150	50	420	500	42	35	30	SNL 528 TG	98	250	223	285	22228 CCK/W33	H 3128	FRB 15/250
125	205	150	302	150	50	420	500	42	35	30	SNL 528 TG	98	250	223	285	23228 CCK/W33	H 2328	FRB 5/250
135	220	160	323	160	60	450	530	42	35	30	SNL 530 TG	106	270	241	295	22230 CCK/W33	H 3130	FRB 16.5/270
135	220	160	323	160	60	450	530	42	35	30	SNL 530 TG	106	270	241	295	23230 CCK/W33	H 2330	FRB 5/270
140	235	160	344	170	60	470	550	42	35	30	SNL 532 TG	114	290	254	315	22232 CCK/W33	H 3132	FRB 17/290
140	235	160	344	170	60	470	550	42	35	30	SNL 532 TG	114	290	254	315	23232 CCK/W33	H 2332	FRB 5/290

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNL 600

Shaft d_a mm	Housing Dimension										Designations Housing Complete with two seal	Bearing Seating		Width Across Seal		Appropriate bearings and associated components
Shaft d_a mm	A mm	A₁	H	H₁	H₂	J	L	N	N₁	G	Designations Housing Complete with two seal	C_a	D_a	A₂	A₃	self-aligning ball bearing spherical roller bearing	Adapter sleeve	Locating rings 2 per housing
20	77	52	89	50	22	150	185	20	15	12	SNL 605 TG	32	62	89	135	1305 EK	H 305	FRB 7.5/62
20	77	52	89	50	22	150	185	20	15	12	SNL 605 TG	32	62	89	135	2305 EK	H 2305	FRB 3.5/5
25	82	52	93	50	22	150	185	20	15	12	SNL 606 TG	34	72	94	140	1306 EK	H 306	FRB 7.5/72
25	82	52	93	50	22	150	185	20	15	12	SNL 606 TG	34	72	94	140	2306 K	H 2306	FRB 3.5/72
30	85	60	108	60	25	170	205	20	15	12	SNL 607 TG	39	80	97	145	1307 EK	H 307	FRB 9/80
30	85	60	108	60	25	170	205	20	15	12	SNL 607 TG	39	80	97	145	2307 EK	H 2307	FRB 4/80
35	90	60	113	60	25	170	205	20	15	12	SNL 608 TG	41	90	102	150	1308 EK / 21308 CCK	H 308	FRB 9/90
35	90	60	113	60	25	170	205	20	15	12	SNL 608 TG	41	90	102	150	2308 EK / 22308 CCK/W33	H 2308	FRB 4/90
40	95	70	127	70	28	210	255	24	18	16	SNL 609 TG	44	100	107	155	1309 EK / 21309 EK	H 309	FRB 9.5/100
40	95	70	127	70	28	210	255	24	18	16	SNL 609 TG	44	100	107	155	2309 EK / 22309 CCK/W33	H 2309	FRB 4/100
45	105	70	133	70	30	210	255	24	18	16	SNL 610 TG	48	110	117	165	1310 EK / 21310 EK	H 310	FRB 10.5/110
45	105	70	133	70	30	210	255	24	18	16	SNL 610 TG	48	110	117	165	2310 K / 22310 CCK/W33	H 2310	FRB 4/110
50	110	80	148	80	30	230	275	24	18	16	SNL 611 TG	51	120	122	170	1311 EK / 21311 EK	H 311	FRB 11/120
50	110	80	148	80	30	230	275	24	18	16	SNL 611 TG	51	120	122	170	2311 K / 22311 EK	H 2311	FRB 4/120
55	115	80	154	80	30	230	280	24	18	16	SNL 612 TG	56	130	127	175	1312 EK / 21312 EK	H 312	FRB 12.5/130
55	115	80	154	80	30	230	280	24	18	16	SNL 612 TG	56	130	127	175	2312 K / 22312 EK	H 2312	FRB 5/130

JMC

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Series SNL 600

Shaft d_a mm	Housing Dimension										Designations Housing Complete with two seal	Bearing Seating		Width Across Seal		Appropriate bearings and associated components
Shaft d_a mm	A mm	A₁	H	H₁	H₂	J	L	N	N₁	G	Designations Housing Complete with two seal	C_a	D_a	A₂	A₃	self-aligning ball bearing spherical roller bearing	Adapter sleeve	Locating rings 2 per housing
60	120	90	175	95	32	260	315	28	22	20	SNL 613 TG	58	140	138	180	1313 EK / 21313 EK	H 313	FRB 12.5/140
60	120	90	175	95	32	260	315	28	22	20	SNL 613 TG	58	140	138	180	2313 EK / 22313 EK	H 2313	FRB 5/140
60	125	90	183	95	32	260	320	28	22	20	SNL 614 TG	61	150	143	210	1314 K / 21314 K	H 314	FRB 13/150
60	125	90	183	95	32	260	320	28	22	20	SNL 614 TG	61	150	143	210	2314 K / 22314 K	H 2314	FRB 10/150
65	140	100	193	100	35	290	345	28	22	20	SNL 615 TG	65	160	158	200	1315 K / 21315 EK	H 315	FRB 14/160
65	140	100	193	100	35	290	345	28	22	20	SNL 615 TG	65	160	158	200	2315 K / 22315 EK	H 2315	FRB 5/160
70	145	100	210	112	35	290	345	28	22	20	SNL 616 TG	68	170	163	205	1316 K / 21316 EK	H 316	FRB 14.5/170
70	145	100	210	112	35	290	345	28	22	20	SNL 616 TG	68	170	163	205	2316 K / 22316 EK	H 2316	FRB 5/170
75	160	110	215	112	40	320	380	32	26	24	SNL 617 TG	70	180	178	220	1317 K / 21317 EK	H 317	FRB 14.5/180
75	160	110	215	112	40	320	380	32	26	24	SNL 617 TG	70	180	178	220	2317 K / 22317 EK	H 2317	FRB 5/180
80	155	110	229	112	45	320	380	32	26	24	SNL 618 TG	74	190	155	170	1318 K / 21318 K	H 318	FRB 15.5/190
80	155	110	229	112	45	320	380	32	26	24	SNL 618 TG	74	190	155	170	2318 K / 22318 CK	H 2318	FRB 10/190
85	175	120	239	125	45	350	410	32	26	24	SNL 619 TG	80	200	191	235	1319 K / 21319 EK	H 319	FRB 17.5/200
85	175	120	239	125	45	350	410	32	26	24	SNL 619 TG	80	200	191	235	2319 K / 22319 EK	H 2319	FRB 6.5/200
90	185	120	271	140	45	350	410	32	26	24	SNL 620 TG	86	215	199	240	1320 K / 21320 EK	H 320	FRB 19.5/215
90	185	120	271	140	45	350	410	32	26	24	SNL 620 TG	86	215	199	240	2320 K / 22320 EK	H 2320	FRB 6.5/215
100	185	120	271	140	45	350	410	32	26	24	SNL 622 TG	100	240	185	203	21322 K	H 322	FRB 20/240
100	185	120	271	140	45	350	410	32	26	24	SNL 622 TG	100	240	185	203	22322 CK	H 2322	FRB 10/240
110	190	130	298	150	50	390	450	35	28	24	SNL 624 TG	106	260	190	208	22324 CK	H 2324	FRB 10/260
115	190	130	321	160	60	450	530	42	35	30	SNL 626 TG	113	280	205	223	22324 CK	H 2324	FRB 10/280
125	205	160	344	170	60	470	550	42	35	30	SNL 628 TG	122	300	215	233	22328 K	H 2328	FRB 10/300
135	225	180	386	190	65	560	650	42	35	30	SNL 630 TG	128	320	225	243	22330 K	H 2330	FRB 10/320
140	235	190	406	200	70	580	680	50	42	35	SNL 632 TG	134	340	235	253	22332 K	H 2332	FRB 10/340

JMC

PLUMMER BLOCK FOR BEARINGS WITH CYLINDRICAL BORE

Shaft Dia		SN Series		SNA Series		SNH Series
d_a	d_b
25	30	SN 205	SN 305	SNA 205	SNA 305	SNH 205	SNH 305
30	35	SN 206	SN 306	SNA 206	SNA 306	SNH 206	SNH 306
35	45	SN 207	SN 307	SNA 207	SNA 307	SNH 207	SNH 307
40	50	SN 208	SN 308	SNA 208	SNA 308	SNH 208	SNH 308
45	55	SN 209	SN 309	SNA 209	SNA 309	SNH 209	SNH 309
50	60	SN 210	SN 310	SNA 210	SNA 310	SNH 210	SNH 310
55	65	SN 211	SN 311	SNA 211	SNA 311	SNH 211	SNH 311
60	70	SN 212	SN 312	SNA 212	SNA 312	SNH 212	SNH 312
65	75	SN 213	SN 313	SNA 213	SNA 313	SNH 213	SNH 313
70	80	SN 214	SN 314	SNA 214	SNA 314	SNH 214	SNH 314
75	85	SN 215	SN 315	SNA 215	SNA 315	SNH 215	SNH 315
80	90	SN 216	SN 316	SNA 216	SNA 316	SNH 216	SNH 316
85	95	SN 217	SN 317	SNA 217	SNA 317	SNH 217	SNH 317
90	100	SN 218	SN 318	SNA 218	SNA 318	SNH 218	SNH 318
95	110	SN 219	SN 319	SNA 219	SNA 319	SNH 219	SNH 319
100	115	SN 220	SN 320	SNA 220	SNA 320	SNH 220	SNH 320
110	125	SN 222	SN 322	SNA 222	SNA 322	SNH 222
120	135	SN 224	SN 324	SNA 224		SNH 224
130	145	SN 226	SN 326	SNA 226		SNH 226
140	155	SN 228	SN 328	SNA 228		SNH 228
150	165	SN 230	SN 330	SNA 230		SNH 230
160	175	SN 232	SN 332	SNA 232		SNH 232

All other Dimensions are same as per

Series SN 505 to SN 532 and Series SN 606 to SN 632

Series SNA 505 to SNA 532 and Series SNA 605 to SNA 622

Series SNH 506 to SNH 532 and Series SNH 605 to SNH 622

Series SNL 506 to SNL 532 and Series SNL 605 to SNL 622

JMC

PLUMMER BLOCKS HOLES FOR ATTACHMENT BOLTS

Series SSNHD and SSNAD

Housing Dimensions	Designations Two holes		Suitable bolts		Designations Four holes			Suitable bolts		Housing Dimensions	Designations Two holes		Designations Four holes
Housing Dimensions	J mm	N₁	mm	in	J₁ mm	J₂	N₂	mm	in	Housing Dimensions	J mm	N₁	J₁	J₂	N₂
SSHND 508-607	170	15	M12	¹/₂	160	34	11	M10	³/₈	SSNAD 511-609	210	18	200	35	13
SSHND 509	170	15	M12	¹/₂	160	34	11	M10	³/₈	SSNAD 512-610	210	18	200	35	13
SSHND 510-608	170	15	M12	¹/₂	160	34	11	M10	³/₈	SSNAD 513-611	230	18	220	40	13
SSHND 511-609	210	18	M16	⁵/₈	200	40	14	M12	¹/₂	SSNAD 515-612	230	18	220	40	13
SSHND 512-610	210	18	M16	⁵/₈	200	40	14	M12	¹/₂	SSNAD 516-613	260	22	250	50	13
SSHND 513-611	230	18	M16	⁵/₈	220	48	14	M12	¹/₂	SSNAD 517	260	22	250	50	13
SSHND 515-612	230	18	M16	⁵/₈	220	48	14	M12	¹/₂	SSNAD 518-615	290	22	280	50	18
SSHND 516-613	260	22	M20	³/₄	252	52	18	M16	⁵/₈	SSNAD 519-616	290	22	280	50	18
SSHND 517	260	22	M20	³/₄	252	52	18	M16	⁵/₈	SSNAD 520-617	320	26	300	60	18
SSHND 518-615	290	22	M20	³/₄	280	58	18	M16	⁵/₈	SSNAD 522-619	350	26	320	70	18
SSHND 519-616	290	22	M20	³/₄	280	58	18	M16	⁵/₈	SSNAD 524-620	350	26	330	70	18
SSHND 520-617	320	26	M24	⁷/₈	300	66	18	M16	⁵/₈	SSNAD 526	380	28	370	70	22
SSHND 522-619	350	26	M24	⁷/₈	320	74	18	M16	⁵/₈	SSNAD 528	420	35	400	80	26
SSHND 524-620	350	26	M24	⁷/₈	330	74	18	M16	⁵/₈	SSNAD 530	450	35	430	90	26
SSHND 526	380	28	M26	1	370	80	22	M20	³/₄	SSNAD 532	470	35	450	90	26
SSHND 528	420	35	M30	1¹/₄	400	92	26	M24	⁷/₈
SSHND 530	450	35	M30	1¹/₄	430	100	26	M24	⁷/₈
SSHND 532	4790	35	M30	1¹/₄	450	100	26	M24	⁷/₈

JMC

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

Series SD 3100 TS

Shaft Dia.	Dimensions For metric shafts-Millimetres														Housing with sealing collars Designation	Bearing with adapter sleeve Designation	Appropriate locating rings Designation	Qty.	2 O-rings
d₁ mm	A	A₁	A₂	H	H₁	H₂ mm	L	J	J₁	CA	S	G	N	N₁	Housing with sealing collars Designation	Bearing with adapter sleeve Designation	Appropriate locating rings Designation		mm
150	230	180	240	335	170	70	510	430	100	108	14	24	34	28	SD 3134 TS	23134 CK + H 3134	FRB 10/280	2	530 X 4
160	240	190	250	355	180	75	530	450	110	116	15	24	34	28	SD 3136 TS	23136 CK + H 3136	FRB 10/300	2	560 X 4
170	260	210	270	375	190	80	560	480	120	124	10	24	34	28	SD 3138 TS	23138 CK + H 3138	FRB 10/320	2	590 X 4
180	280	230	290	410	210	85	610	510	130	132	10	30	42	35	SD 3140 TS	23140 CK + H 3140	FRB 10/340	2	620 X 4
200	290	240	300	435	220	90	640	540	140	140	12	30	42	35	SD 3144 TS	23144 CK + H 3144	FRB 10/370	2	680 X 4
220	310	260	320	475	240	95	700	600	150	148	12	30	42	35	SD 3148 TS	23148 CK + H 3148	FRB 10/400	2	750 X 4
240	320	280	330	515	260	100	770	650	160	164	13	36	50	42	SD 3152 TS	23152 CK K + H 3152	FRB 10/440	2	810 X 4
260	320	280	330	550	280	105	790	670	160	166	16	36	50	42	SD 3156 TS	23156 CK + H 3156	FRB 10/460	2	870 X 4
280	350	310	360	590	300	110	830	710	190	180	22	36	50	42	SD 3160 TS	23160 CK + H 3160	FRB 10/500	2	940 X 4
300	370	330	380	630	320	115	880	750	200	196	23	36	50	42	SD 3164 TS	23164 CK + H 3164	FRB 10/540	2	1000 X 4
320	400	360	410	675	340	120	950	810	220	210	24	36	42	52	SD 3168 TS	23168 CK + H 3168	FRB 10/580	2	1060 X 4
340	400	360	410	695	350	120	1000	840	220	212	30	36	42	52	SD 3172 TS	23172 CK + H 3172	FRB 10/600	2	1130 X 4
360	400	360	410	715	360	120	1040	870	220	214	30	36	42	52	SD 3176 TS	32176 CK + H 3176	FRB 10/620	2	1190 X 4
380	430	390	440	755	380	125	1120	950	240	220	30	42	48	60	SD 3180 TS	23180 CK + H 3180	FRB 10/650	2	1260 X 4
400	460	420	470	810	410	130	1170	1000	260	244	35	42	48	60	SD 3184 TS	23184 CK + H 3184	FRB 10/700	2	1320 X 4

JMC

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

Series SD 30 TS

Shaft Dia.	Dimensions For metric shafts-Millimetres											Housing with sealing collars	Bearing with adapter sleeve	Appropriate locating rings	Qty.	2 O-rings
d₁ mm.	A	A₁	A₂	H	H₁ mm.	H₂ mm.	L	J	J₁	G	CA	Designation	Designation	Designation		Length mm.
160	230	180	240	335	170	70	510	430	100	24	94	SD 3036 TS	23036 CK + H 3036	FRB 10/280	2	560 X 4
170	240	190	250	355	180	75	530	450	110	24	95	SD 3038 TS	23038 CK + H 3038	FRB 10/290	2	590 X 4
180	260	210	270	375	190	80	560	480	120	24	102	SD 3040 TS	23040 CK + H 3040	FRB 10/310	2	620 X 4
200	280	230	290	410	210	85	610	510	130	30	110	SD 3044 TS	23044 CK + H 3044	FRB 10/340	2	680 X 4
220	290	240	300	435	220	90	640	540	140	30	112	SD 3048 TS	23048 CK + H 3048	FRB 10/360	2	750 X 4
240	310	260	320	475	240	95	700	600	150	30	124	SD 3052 TS	23052 CK + H 3052	FRB 10/400	2	810 X 4
260	320	280	330	515	260	100	770	650	160	36	126	SD 3056 TS	23056 CK + H 3056	FRB 10/420	2	870 X 4
280	320	280	330	550	280	105	790	670	160	36	138	SD 3060 TS	23060 CK + H 3060	FRB 10/460	2	940 X 4
300	350	310	360	590	300	110	830	710	190	36	141	SD 3064 TS	23064 CK + H 3064	FRB 10/480	2	1000 X 4
320	370	330	380	630	320	115	880	750	200	36	153	SD 3068 TS	23068 CK + H 3068	FRB 10/520	2	1070 X 4
340	370	330	380	630	320	115	880	750	200	36	154	SD 3072 TS	23072 CK + H 3072	FRB 10/540	2	1130 X 4
360	400	360	410	675	340	120	950	810	220	36	155	SD 3076 TS	23076 CK + H 3076	FRB 10/560	2	1190 X 4
380	400	360	410	695	350	120	1000	840	220	36	168	SD 3080 TS	23080 CK + H 3080	FRB 10/600	2	1260 X 4
400	400	360	410	715	360	120	1040	870	220	36	170	SD 3084 TS	23084 CK + H 3084	FRB 10/620	2	1320 X 4
410	430	390	440	755	380	125	1120	950	240	42	177	SD 3088 TS	23088 CK + H 3088	FRB 10/650	2	1380 X 4
430	460	420	470	810	410	130	1170	1000	260	42	183	SD 3092 TS	23092 CK + H 3092	FRB 10/680	2	1450 X 4

JMC

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

Series SD 500 and SD 600

Shaft Dia.	Dimensions mm.												Housing	Bearing and adapter sleeve	Locating ring
d₁ mm.	D	h	l	a	b	c mm.	m	n	u	v	s	CA	Designation	Designations	Designations	Qty.
135	270	160	240	550	220	55	450	120	33	45	27	93	SD 530	22230 CK + H 3130	FRB 10/270	2
140	290	170	250	580	230	55	480	130	33	45	27	100	SD 532	22232 CK + H 3132	FRB 10/290	2
150	310	180	270	620	250	60	510	140	36	50	30	106	SD 534	22234 CK + H 3134	FRB 10/310	2
160	320	190	280	650	260	60	540	150	36	50	30	106	SD 536	22236 CK + H 3136	FRB 10/320	2
170	340	200	290	700	280	65	570	160	40	55	33	112	SD 538	22238 CK + H 3138	FRB 10/340	2
180	360	210	300	740	290	65	610	170	40	55	33	118	SD 540	22240 CK + H 3140	FRB 10/360	2
200	400	240	330	820	320	70	680	190	42	62	36	128	SD 544	22244 CK + H 3144	FRB 10/400	2
220	440	260	340	880	330	85	740	200	45	65	39	140	SD 548	22248 CK + H 3148	FRB 10/440	2
240	480	280	370	940	360	85	790	210	45	65	39	150	SD 552	22252 CK + H 3152	FRB 10/480	2
260	500	300	390	990	380	100	830	230	52	77	45	150	SD 556	22256 CK + H 3156	FRB 10/500	2
280	540	325	410	1060	400	100	890	250	52	77	45	160	SD 560	22260 CK + H 3160	FRB 10/540	2
300	580	355	440	1110	430	110	930	270	56	85	48	170	SD 564	22264 CK + H 3164	FRB 10/580	2
135	320	190	280	650	260	60	540	150	36	50	30	118	SD 630	22330 CK + H 2330	FRB 10/320	1
140	340	200	290	700	280	65	570	160	40	55	33	124	SD 632	22332 CK + H 2332	FRB 10/340	1
150	360	210	300	740	290	65	610	170	40	55	33	130	SD 634	22334 CK + H 2334	FRB 10/360	1
160	380	225	320	780	310	70	640	180	42	62	36	136	SD 636	22336 CK + H 2336	FRB 10/380	1
170	400	240	330	820	320	70	680	190	42	62	36	142	SD 638	22338 CK + H 2338	FRB 10/400	1
180	420	250	350	860	340	85	710	200	45	65	39	148	SD 640	22340 CK + H 2340	FRB 10/420	1
200	460	280	360	920	350	85	770	210	45	65	39	155	SD 644	22344 CK + H 2344	FRB 10/460	1
220	500	300	390	990	380	100	830	230	52	77	45	165	SD 648	22348 CK + H 2348	FRB 10/500	1
240	540	325	410	1060	400	100	890	250	52	77	45	175	SD 652	22352 CK + H 2352	FRB 10/540	1
260	580	355	440	1110	430	110	930	270	56	85	48	185	SD 656	22356 CK + H 2356	FRB 10/580	1

JMC

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

Series SD 3200 TS

Shaft Dia.	Dimensions For metric shafts-Millimetres											Housing with sealing collars	Bearing with adapter sleeve	Appropriate locating rings	Qty.	2 O-rings
d1 mm	A	A₁	A₂	H mm	H₁ mm	H₂	L	J	J₁	G	CA	Designation	Designation	Designation		Length mm.
150	260	210	270	375	190	80	560	480	120	24	130	SD 3234 TS	23234 CK + H 2334	FRB 10/310	2	530 X 4
160	260	210	270	375	190	80	560	480	120	24	132	SD 3236 TS	23236 CK + H 2336	FRB 10/320	2	560 X 4
170	280	230	290	410	210	85	610	510	130	30	140	SD 3238 TS	23238 CK + H 2338	FRB 10/340	2	590 X 4
180	290	240	300	435	220	90	640	540	140	30	148	SD 3240 TS	23240 CK + H 2340	FRB 10/360	2	620 X 4
200	310	260	320	475	240	95	700	600	150	30	164	SD 3244 TS	23244 CK + H 2344	FRB 10/400	2	680 X 4
220	320	280	330	515	260	100	770	650	160	36	180	SD 3248 TS	23248 CK + H 2348	FRB 10/440	2	750 X 4
240	350	310	360	590	300	110	830	710	190	36	194	SD 3252 TS	23252 CK + H 2352	FRB 10/480	2	810 X 4
260	350	310	360	590	300	110	830	710	190	36	196	SD 3256 TS	23256 CK + H 2356	FRB 10/500	2	870 X 4
280	370	330	380	630	320	115	880	750	200	36	212	SD 3260 TS	23260 CK + H 3260	FRB 10/540	2	940 X 4
300	400	360	410	675	340	120	950	810	220	36	228	SD 3264 TS	23264 CK + H 3264	FRB 10/580	2	1000 X 4
320	400	360	410	715	360	120	1040	870	220	36	244	SD 3268 TS	23268 CK + H 3268	FRB 10/620	2	1060 X 4
340	430	390	440	755	380	125	1120	950	240	42	252	SD 3272 TS	23272 CK + H 3272	FRB 10/650	2	1130 X 4
360	460	420	470	810	410	130	1170	1000	260	42	260	SD 3276 TS	23276 CK + H 3276	FRB 10/680	2	1190 X 4

JMC

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

Series SD 3300

Shaft Dia.	Dimensions												Housing	Bearing and adapter sleeve	Locating ring(s) (to be ordered seperately)	Qty.
d₁ mm	D	h	l	a	b	c mm	m	n	u	v	s	CA	Designation	Designations	Designations	Qty.
150	260	160	235	540	190	50	450	110	28	38	M 24	77	SD 3334	23034 CK + H 3034	FRB 10/260	1
160	280	170	250	560	200	55	470	120	32	42	M 30	84	SD 3336	23036 CK + H 3036	FRB 10/280	1
170	290	170	260	580	220	55	480	130	32	42	M 30	85	SD 3338	23038 CK + H 3038	FRB 10/290	1
180	310	180	270	620	230	60	510	140	32	52	M 30	92	SD 3340	23040 CK + H 3040	FRB 10/310	1
200	340	200	290	700	260	65	570	160	35	55	M 30	100	SD 3344	23044 CK + H 3044	FRB 10/340	1
220	360	210	300	740	270	65	610	170	35	55	M 30	102	SD 3348	23048 CK + H 3048	FRB 10/360	1
240	400	240	330	820	300	70	680	190	40	60	M 36	114	SD 3352	23052 CK + H 3052	FRB 10/400	1
260	420	250	350	860	320	85	710	200	42	62	M 36	116	SD 3356	23056 CK + H 3056	FRB 10/420	1
280	460	280	360	920	330	85	770	210	42	62	M 36	128	SD 3360	23060 CK + H 3060	FRB 10/460	1
300	480	280	370	940	340	85	790	210	42	62	M 36	131	SD 3364	23064 CK + H 3064	FRB 10/480	1
320	520	310	400	1020	370	100	860	230	48	68	M 42	143	SD 3368	23068 CK + H 3068	FRB 10/520	1
340	540	325	410	1060	390	100	890	250	48	68	M 42	144	SD 3372	23072 CK + H 3072	RFB 10/540	1
360	560	340	440	1080	390	100	900	260	48	68	M 42	145	SD 3376	23076 CK + H 3076	FRB 10/560	1

JMC

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

Series SDJC 3100

Shaft Dia.	Housing Dimensions														Designations Housing for through shaft		Appropriate bearing	Adapter sleeve
d_a mm.	A	A₁	C_a	D_a	H mm.	H₁ mm.	H₂	J	J₁	L	N	N₁	S	G	Locating bearing	Non-locating bearing	Appropriate bearing	Adapter sleeve
320	410	350	190	580	705	360	70	700	240	830	68	52	30	42	SDJC 3168 FTS	SDJC 3168 LTS	23168 CCK/W33	OH 3168 H
340	410	350	192	600	705	360	70	700	240	830	68	52	30	42	SDJC 3172 FTS	SDJC 3172 LTS	23172 CAK/W33	OH 3172 H
360	450	380	194	620	765	390	75	760	280	880	68	52	35	42	SDJC 3176 FTS	SDJC 3176 LTS	23176 CAK/W33	OH 3176 H
380	450	380	200	650	765	390	75	760	280	880	68	52	35	42	SDJC 3180 FTS	SDJC 3180 LTS	23180 CAK/W33	OH 3180 H
400	480	400	224	700	855	440	80	810	280	940	68	52	35	42	SDJC 3184 FTS	SDJC 3184 LTS	23184 CAK/W33	OH 3184 H
410	480	400	226	720	855	440	80	810	280	940	68	52	35	42	SDJC 3188 FTS	SDJC 3188 LTS	23188 CAK/W33	OH 3188 H
430	520	440	240	760	920	470	80	880	310	1040	80	60	35	48	SDJC 3192 FTS	SDJC 3192 LTS	23192 CAK/W33	OH 3192 H
450	520	440	248	790	920	470	80	880	310	1040	80	60	35	48	SDJC 3196 FTS	SDJC 3196 LTS	23196 CAK/W33	OH 3196 H

Note : 1) The bearing seating in housing for non-locating bearings is 20 mm wider dimension C_a

2) Housings for shaft ends with one end cover carry the designation suffix A, e.g SDJC 3168 AFTS and SDJC 3168 ALTS respectively

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings withAdapter Sleeve Locating Ring Felt Strip

PLUMMER BLOCK FOR BEARINGS WITH CYLINDRICAL BORE

PLUMMER BLOCKS HOLES FOR ATTACHMENT BOLTS

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

PLUMMER BLOCKS FOR BEARINGS WITH ADAPTER SLEEVE

80, First Floor Shardanand Marg, G.B Road Delhi- 110006, india

+91 8700651296 +91 9810422422

sleevestradecentre@gmail.com

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip

Plummer Blocks for Bearings with
Adapter Sleeve Locating Ring Felt Strip